Enhanced Aerosol Particle Filtration Efficiency of Nonwoven Porous Cellulose Triacetate Nanofiber Mats

Balgis Ratna

Murata Hiroyuki

Ogi Takasi

Kobayashi Makoto

Bao Li

ACS Omega

ACS Omega,

Aerosol particle filtration in most penetrating particle size (MPPS) region is of great challenge for conventional nonwoven filter mats. The present work, therefore, redesigns conventional filter mats by introducing porous structure. A combination of thermally induced phase separation and breath figure mechanism was employed to synthesize porous cellulose triacetate fibers, in conjunction with the volatile solvent methylene chloride. The ambient humidity, the concentration of the polyvinylpyrrolidone (PVP) secondary polymer, and the ethanol cosolvent were all adjusted to modify the Taylor cone formation, jet stability,and fiber porosity. After fiber formation, the PVP was removed to obtain a superhydrophobic material. To distinguish the effect of pores, the performance of porous and nonporous nanofibers having similar sizes was conducted. Tests were performed using various dust particle sizes, and the results show that the collection efficiency of the porous fibers, resulting from particle diffusion, inertial impaction, and interception, was improved. Interestingly, the efficiency of the porous fibers in the MPPS region was exceptionally enhanced (up to 95%), demonstrating that the presence of dynamic pores greatly contributes to particle capture.

英語

American Chemical Society

© 2018 American Chemical Society, This is an open access article published under an ACS AuthorChoice License, which permits copying and redistribution of the article or any adaptations for non-commercial purposes.

[ISSN] 2470-1343

[DOI] 10.1021/acsomega.8b00695

[URI] https://pubs.acs.org/doi/abs/10.1021/acsomega.8b00695