Accurate evaluation of mixed-mode intensity factors of cracked shear-deformable plates by an enriched meshfree Galerkin formulation

Tanaka Satoyuki

Suzuki Hirotaka

Sadamoto Shota

Okazawa Shigenobu

Yu Tiantang

Bui Tinh Quoc

Archive of Applied Mechanics

A novel meshfree discretization technique in terms of the reproducing kernel particle method is presented for accurately evaluating mixed-mode intensity factors of cracked shear-deformable plates. Mindlin–Reissner plate theory is adopted to solve the cracked plates problem in the Galerkin formulation, considering transverse shear deformation. The diffraction method, visibility criterion and enriched basis are included in the generation of meshfree interpolants for the modeling of fracture. In this work, numerical integration is treated using the stabilized conforming nodal integration (SCNI) and subdomain stabilized conforming integration (SSCI). The J-integral (contour integral) is employed to analyze the fracture mechanics parameters. SCNI/SSCI is thus adopted to evaluate the contour integral and to split the original J-integral into symmetric and asymmetric J-integral values. They are calculated by decomposing the smoothed displacement, moment and shear force quantities into symmetric/asymmetric parts. In addition, a displacement ratio method is introduced to divide the asymmetric J-integral value into corresponding moment and shear force intensity factors. The accuracy of the intensity factors and the path-independent properties in mixed-mode fracture problems are critically examined through several numerical examples.

Meshfree

Reissner–Mindlin plate

Fracture

J-integral

Nodal integration

英語

Springer Nature

This version of the article has been accepted for publication, after peer review (when applicable) and is subject to Springer Nature’s AM terms of use, but is not the Version of Record and does not reflect post-acceptance improvements, or any corrections. The Version of Record is available online at:https://doi.org/10.1007/s00419-016-1193-x

This is not the published version. Please cite only the published version.

この論文は出版社版ではありません。引用の際には出版社版をご確認、ご利用ください。

[DOI] https://doi.org/10.1007/s00419-016-1193-x ～の異版である

日本学術振興会

Japan Society for the Promotion of Science

[Crossref Funder] https://doi.org/10.13039/501100001691

等価分布応力下におけるき裂結合力モデルに関する研究 研究課題

A fundamental study for a strip yield modeling under equivalent distributed stress Research Project

16K18323

日本学術振興会

Japan Society for the Promotion of Science

[Crossref Funder] https://doi.org/10.13039/501100001691

多軸応力影響と繰り返し載荷影響を考慮した船体桁の縦曲げ最終強度評価に関する研究 研究課題

Ultimate longitudinal bending strength of ship hull girder considering multi-axial stress and repeated loading effects

15H02328

日本学術振興会

Japan Society for the Promotion of Science

[Crossref Funder] https://doi.org/10.13039/501100001691

建造から品質・安全性・寿命まで評価可能な四次元可視化CAEシステムの開発

Development of 4 Dimensional CAE Visualization System for Assessment of Quality and Safety of Structures through Life Time Starting from Production

15H04212

日本学術振興会

Japan Society for the Promotion of Science

[Crossref Funder] https://doi.org/10.13039/501100001691

船体構造と騒音伝達経路の関係の解明と騒音レベルを低減する構造の創生に関する研究 研究課題

Study on relationship between ship structure and noise transmission route and research on creation of structure to reduce noise level

16H04603

日本学術振興会

Japan Society for the Promotion of Science

[Crossref Funder] https://doi.org/10.13039/501100001691

き裂を有するパネルの圧壊挙動メカニズムの解明

Collapse Behavior of Rectangular Panel with Crack Damage. Research Project

15K06632