Effect of spray impingement distance on piston top fuel adhesion in direct injection gasoline engines

Luo Hongliang

Nishida Keiya

Uchitomi Shintaro

Ogata Youichi

Zhang Wu

Fujikawa Tatsuya

International Journal of Engine Research

Direct injection is an attractive technology for improving fuel economy and engine performance in gasoline engines. However, the adhered fuel formed on the piston surface has significant influence on the combustion efficiency and emissions. To obtain a better understanding of fuel adhesion, this work involved investigation of the spray and impingement on a flat wall through a mini-sac injector with a single hole. Different impingement distances and injection pressures were investigated. The evolution of the impinging spray was obtained by the Mie scattering method. The refractive index matching method was applied to measure fuel adhesion. The mass, area, and thickness of adhesion under different conditions were compared. The experimental results show that the fuel adhesion on the wall increases significantly with a large impingement distance. Moreover, the maximum thickness increases and the thickness uniformity of the fuel adhesion declines under a large impingement distance condition.

Gasoline engine

fuel adhesion

impinging spray

impingement distance

injection pressure

英語

SAGE Publications

Luo H, Nishida K, Uchitomi S, Ogata Y, Zhang W, Fujikawa T. Effect of spray impingement distance on piston top fuel adhesion in direct injection gasoline engines. International Journal of Engine Research. 21(5), pp.742-754. Copyright © 2020 Authors. doi:10.1177/1468087418774175

This is not the published version. Please cite only the published version. この論文は出版社版ではありません。引用の際には出版社版をご確認、ご利用ください。

[ISSN] 1468-0874

[ISSN] 2041-3149

[DOI] 10.1177/1468087418774175

[DOI] https://doi.org/10.1177/1468087418774175