Pore size tuning of bis(triethoxysilyl)propane (BTESP)-derived membrane for gas separation: Effects of the acid molar ratio in the sol and of the calcination temperature

Separation and Purification Technology 242 巻 116742- 頁 2020-07-01 発行
アクセス数 : 282
ダウンロード数 : 65

今月のアクセス数 : 5
今月のダウンロード数 : 5
ファイル情報(添付)
SeparPurifTech_242_116742.pdf 646 KB 種類 : 全文 エンバーゴ : 2022-07-01
タイトル ( eng )
Pore size tuning of bis(triethoxysilyl)propane (BTESP)-derived membrane for gas separation: Effects of the acid molar ratio in the sol and of the calcination temperature
作成者
Inoue Ryota
Yamamoto Kazuki
Gunji Takahiro
収録物名
Separation and Purification Technology
242
開始ページ 116742
抄録
Bis(triethoxysilyl)propane (BTESP) is a bridged-type organoalkoxysilane with a Si-C3H6-Si bond. It was utilized for membrane fabrication via a sol-gel method to achieve high permselectivity for large molecules. Membrane fabrication parameters such as the acid molar ratio (AR) in the sol and calcination temperature were evaluated for their effect on the network pore size and on gas permeation properties, as evaluated by the molecular size dependence (0.26–0.55 nm) and temperature dependence (50–200 °C) of gas permeance. BTESP membranes with different ARs (10−1, 100, and 10) showed H2/N2 and H2/CF4 selectivities of 20–30 and 640–32,000, respectively. As AR was increased, each gas permeance also increased, but H2 selectivity that corresponds to network pore size was decreased. FT-IR analysis indicated that the density of the Si-OH groups (Si-OH/Si-O-Si) of unfired gels was decreased with a higher AR, so that condensation of the Si-OH groups during the calcination process formed a dense network structure in the case of BTESP membranes with a low AR (10−1). Calcination temperature also affected the network structure of BTESP membranes. BTESP membranes calcined at different temperatures (350, 450, and 600 °C) showed H2/N2 and H2/CF4 selectivities of 10–30 and 410–32,000, respectively. A BTESP membrane calcined at high temperature (600 °C) showed loose networks since the linking units derived from BTESP were decomposed at temperatures above 500 °C, which resulted in the formation of methyl groups. In conclusion, the AR in a sol is suitable for tuning small pore sizes, while calcination temperature as a membrane fabrication parameter offers the advantage of controllability for loose network structures.
著者キーワード
Organosilica
Membrane
Gas separation
Pore size
Activation energy
言語
英語
資源タイプ 学術雑誌論文
出版者
Elsevier
発行日 2020-07-01
権利情報
© 2020. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/
This is not the published version. Please cite only the published version. この論文は出版社版ではありません。引用の際には出版社版をご確認、ご利用ください。
出版タイプ Author’s Original(十分な品質であるとして、著者から正式な査読に提出される版)
アクセス権 オープンアクセス
収録物識別子
[ISSN] 1383-5866
[DOI] 10.1016/j.seppur.2020.116742
[DOI] https://doi.org/10.1016/j.seppur.2020.116742
備考 The full-text file will be made open to the public on 1 July 2022 in accordance with publisher's 'Terms and Conditions for Self-Archiving'