Pore size tuning of bis(triethoxysilyl)propane (BTESP)-derived membrane for gas separation: Effects of the acid molar ratio in the sol and of the calcination temperature

Separation and Purification Technology Volume 242 Page 116742- published_at 2020-07-01
アクセス数 : 282
ダウンロード数 : 65

今月のアクセス数 : 5
今月のダウンロード数 : 5
File
SeparPurifTech_242_116742.pdf 646 KB 種類 : fulltext エンバーゴ : 2022-07-01
Title ( eng )
Pore size tuning of bis(triethoxysilyl)propane (BTESP)-derived membrane for gas separation: Effects of the acid molar ratio in the sol and of the calcination temperature
Creator
Inoue Ryota
Yamamoto Kazuki
Gunji Takahiro
Source Title
Separation and Purification Technology
Volume 242
Start Page 116742
Abstract
Bis(triethoxysilyl)propane (BTESP) is a bridged-type organoalkoxysilane with a Si-C3H6-Si bond. It was utilized for membrane fabrication via a sol-gel method to achieve high permselectivity for large molecules. Membrane fabrication parameters such as the acid molar ratio (AR) in the sol and calcination temperature were evaluated for their effect on the network pore size and on gas permeation properties, as evaluated by the molecular size dependence (0.26–0.55 nm) and temperature dependence (50–200 °C) of gas permeance. BTESP membranes with different ARs (10−1, 100, and 10) showed H2/N2 and H2/CF4 selectivities of 20–30 and 640–32,000, respectively. As AR was increased, each gas permeance also increased, but H2 selectivity that corresponds to network pore size was decreased. FT-IR analysis indicated that the density of the Si-OH groups (Si-OH/Si-O-Si) of unfired gels was decreased with a higher AR, so that condensation of the Si-OH groups during the calcination process formed a dense network structure in the case of BTESP membranes with a low AR (10−1). Calcination temperature also affected the network structure of BTESP membranes. BTESP membranes calcined at different temperatures (350, 450, and 600 °C) showed H2/N2 and H2/CF4 selectivities of 10–30 and 410–32,000, respectively. A BTESP membrane calcined at high temperature (600 °C) showed loose networks since the linking units derived from BTESP were decomposed at temperatures above 500 °C, which resulted in the formation of methyl groups. In conclusion, the AR in a sol is suitable for tuning small pore sizes, while calcination temperature as a membrane fabrication parameter offers the advantage of controllability for loose network structures.
Keywords
Organosilica
Membrane
Gas separation
Pore size
Activation energy
Language
eng
Resource Type journal article
Publisher
Elsevier
Date of Issued 2020-07-01
Rights
© 2020. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/
This is not the published version. Please cite only the published version. この論文は出版社版ではありません。引用の際には出版社版をご確認、ご利用ください。
Publish Type Author’s Original
Access Rights open access
Source Identifier
[ISSN] 1383-5866
[DOI] 10.1016/j.seppur.2020.116742
[DOI] https://doi.org/10.1016/j.seppur.2020.116742
Remark The full-text file will be made open to the public on 1 July 2022 in accordance with publisher's 'Terms and Conditions for Self-Archiving'