Estimation of slip parameters associated with frictional heating during the 1999 Taiwan Chi-Chi earthquake by vitrinite reflectance geothermometry

Maekawa Yuka

Hirono Tetsuro

Yabuta Hikaru

Mukoyoshi Hideki

Kitamura Manami

Ikehara Minoru

Tanikawa Wataru

Ishikawa Tsuyoshi

Earth, Planets and Space

To estimate the slip parameters and understand the fault lubrication mechanism during the 1999 Taiwan Chi-Chi earthquake, we applied vitrinite reflectance geothermometry to samples retrieved from the Chelungpu fault. We found a marked reflectance anomaly of 1.30% ± 0.21% in the primary slip zone of the earthquake, whereas the reflectances in the surrounding deformed and host rocks were 0.45% to 0.77%. By applying a kinetic model of vitrinite thermal maturation together with a one-dimensional heat and thermal diffusion equation, we determined the shear stress and peak temperature in the slip zone during the earthquake to be 1.00 ± 0.04 MPa and 626°C ± 25°C, respectively. Taking into account the probable overestimation of the temperature owing to a mechanochemically enhanced reaction or flash heating at grain contacts, this temperature should be considered an upper limit. The lower limit was previously constrained to 400°C by studies of fluid-mobile trace-element concentrations and magnetic minerals. Therefore, we inferred that the peak temperature during the Chi-Chi earthquake was 400°C to 626°C, corresponding to an apparent friction coefficient of 0.01 to 0.06. Such low friction and the previous evidence of a high-temperature fluid suggest that thermal pressurization likely contributed to dynamic weakening during the Chi-Chi earthquake.

Carbonaceous material

Thermal maturation

Fault friction

Chelungpu fault

英語

Springer Open

© 2014 Maekawa et al.; licensee Springer. This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/2.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly credited.

[ISSN] 1880-5981

[DOI] 10.1186/1880-5981-66-28

[DOI] https://doi.org/10.1186/1880-5981-66-28