このエントリーをはてなブックマークに追加
ID 28472
本文ファイル
Thumnail B1207.pdf 1.06 MB
著者
Murata, Atsuo
Moriwaka, Makoto
Wang, Shuguang
NDC
技術・工学
抄録(英)
A thumb-operated dial-type integrated switch for automobile use was developed, and the task completion time for this type of integrated switch was compared with that for a traditional integrated switch. The rotation torque of an encoder and the rotation diameter were selected as experimental parameters. An attempt was made to identify the optimal and recommended condition of rotation torque and diameter. It was demonstrated that the thumb-operated dial-type integrated switch lead to faster task completion time as compared with the traditional integrated switch. As for the thumb-operated dial-type integrated switch, the following combination of the rotation torque and the rotation diameter were not proper: diameter of 20mm for the rotation torque of 12.9mN・m and 9.2mN・m, and diameters of 20mm and 40mm for the rotation torque of 8.6 mN・m. It was also suggested that the optimal condition cannot be identified using the condition of the rotation force only, and that the optimal condition must be determined taking into account the combination of the rotation torque and the rotation diameter.
掲載誌名
5th International Workshop on Computational Intelligence & Applications Proceedings : IWCIA 2009
開始ページ
330
終了ページ
335
出版年月日
2009-11
出版者
IEEE SMC Hiroshima Chapter
ISSN
1883-3977
言語
英語
NII資源タイプ
会議発表論文
広大資料タイプ
会議発表論文
DCMIタイプ
text
フォーマット
application/pdf
著者版フラグ
publisher
権利情報
(c) Copyright by IEEE SMC Hiroshima Chapter.
関連情報URL
部局名
工学研究科