このエントリーをはてなブックマークに追加
ID 27249
file
title alternative
Cutting Force in Machine Boring of Wood with Augar Bit : Lifting Force of Wood by Augar Bit and Safety Working
creator
Ohuchi, Takeshi
Iwasawa, Kojiro
NDC
Education
abstract
Machine boring of agathis (Agathis alba Foxw.) and other five wood species with both augar bits with a feed-screw at the center and screw-killed bits by use of drilling machine were performed under boring conditions of 1500 rpm of spindle speed and 0.1-0.3 mm/rev of feed per revolution, cutting force (thrust and torque) was measured. Maximum lifting forces of wood by augar bits with different diameters at the first stage of boring were examined and were compared with those for the screw-killed bits. Furthermore, the difference of mean cutting force for 15-mm boring depth of outer corner of bit between the two kinds of bits were also examined. From the experimental results, it became clear that the maximum lifting force of wood by augar bit increased with increases in bit diameter or feed per revolution for all wood species. Thus, since machine boring of wood with augar bit with holding it by hand can be regarded to be very dangerous, safty working of wood machine-boring for pupils at juniar high school was discussed.
journal title
Hiroshima journal of school education
volume
Volume 7
start page
125
end page
130
date of issued
2001-03-20
publisher
広島大学教育学部附属教育実践総合センター
issn
1341-111X
ncid
SelfDOI
language
jpn
nii type
Departmental Bulletin Paper
HU type
Departmental Bulletin Papers
DCMI type
text
format
application/pdf
text version
publisher
department
Graduate School of Education
他の一覧



Last 12 months's access : ? times
Last 12 months's DL: ? times


This month's access: ? times
This month's DL: ? times